{"id":5896,"date":"2026-10-20T10:25:08","date_gmt":"2026-10-20T07:25:08","guid":{"rendered":"https:\/\/www.etkkablo.com\/en\/?p=5896"},"modified":"2026-09-11T10:52:27","modified_gmt":"2026-09-11T07:52:27","slug":"industrial-control-cable-selection","status":"publish","type":"post","link":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/","title":{"rendered":"Industrial Control Cable Selection for Automation and Machinery"},"content":{"rendered":"\n<p id=\"wd-ca664c52\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> should begin with the function of the circuit and the mechanical conditions of the machine rather than with a familiar cable designation. Modern automation equipment can combine PLCs, relays, contactors, sensors, actuators, variable-frequency drives, motors, valves and feedback systems within the same production line, yet these connections do not necessarily require the same cable construction.<\/p>\n\n\n\n<p id=\"wd-dfb05e5e\" class=\"wp-block-wd-paragraph\">For example, a multicore unscreened control cable can be appropriate for conventional relay commands in a relatively low-noise environment. By contrast, sensitive feedback wiring routed near motors or drives can require electromagnetic screening. Meanwhile, machinery exposed to oils, abrasion or continuous movement can require a different sheath and mechanical design from a cable installed permanently inside a control cabinet.<\/p>\n\n\n\n<p id=\"wd-b2cdec5b\" class=\"wp-block-wd-paragraph\">Therefore, the phrase \u201cflexible control cable\u201d is not enough to define a suitable machinery cable. Conductor class, screen construction, core count, voltage rating, sheath material, bending conditions, movement frequency and environmental resistance all need to match the actual application.<\/p>\n\n\n\n<p id=\"wd-bd29b2e8\" class=\"wp-block-wd-paragraph\">Another important distinction concerns movement. A cable manufactured with flexible Class 5 conductors can be convenient to route and install, but that does not automatically make it suitable for continuous flexing inside a drag chain, repeated torsion on a robot or other dynamic applications. Those operating conditions require cable constructions specifically designed for the intended movement.<\/p>\n\n\n\n<p id=\"wd-cc342001\" class=\"wp-block-wd-paragraph\"><strong>Quick answer:<\/strong> industrial control cables should be selected according to circuit function, conductor cross-section, number of cores, electromagnetic environment, installation movement, mechanical stress, fire requirements and exposure to oils, chemicals, moisture or UV. YSLY-type unscreened PVC control cables can suit general automation circuits, screened YSLYCY or similar constructions can provide additional EMI protection, and halogen-free HSL-family cables can be selected where LSZH materials are required. Continuous-flex and robotic applications require additional mechanical evaluation.<\/p>\n\n\n\n<h2 id=\"wd-4d1db18f\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection at a Glance<\/h2>\n\n\n\n<figure class=\"wp-block-table is-style-stripes\"><table><thead><tr><th>Application Condition<\/th><th>Typical Cable Requirement<\/th><th>Main Selection Factor<\/th><\/tr><\/thead><tbody><tr><td>General relay and command circuits<\/td><td>Unscreened multicore control cable<\/td><td>Core count and conductor size<\/td><\/tr><tr><td>Electrically noisy machinery<\/td><td>Screened control cable<\/td><td>EMI protection<\/td><\/tr><tr><td>Analogue feedback<\/td><td>Screened signal\/control or <a href=\"https:\/\/www.etkkablo.com\/en\/product-cat\/instrumentation-cables\/\">instrumentation cable<\/a><\/td><td>Signal integrity<\/td><\/tr><tr><td>PLC digital I\/O<\/td><td>Multicore control cable<\/td><td>Core identification and voltage<\/td><\/tr><tr><td>VFD environment<\/td><td>Screened cable where required<\/td><td>Electromagnetic compatibility<\/td><\/tr><tr><td>Fixed machine wiring<\/td><td>Flexible or fixed control cable according to design<\/td><td>Installation method<\/td><\/tr><tr><td>Continuous movement<\/td><td>Purpose-designed continuous-flex cable<\/td><td>Flex life and bend radius<\/td><\/tr><tr><td>Robotic torsion<\/td><td>Purpose-designed torsion cable<\/td><td>Torsional endurance<\/td><\/tr><tr><td>Oil-exposed machinery<\/td><td>Oil-resistant sheath where required<\/td><td>Chemical compatibility<\/td><\/tr><tr><td>Public or enclosed buildings<\/td><td>LSZH control cable where specified<\/td><td>Fire and smoke requirements<\/td><\/tr><tr><td>Outdoor automation<\/td><td>UV and environmental-resistant construction<\/td><td>Weather exposure<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p id=\"wd-1bcabff7\" class=\"wp-block-wd-paragraph\">Consequently, no single control-cable construction can cover every industrial automation application efficiently.<\/p>\n\n\n\n<h2 id=\"wd-822df32b\" class=\"wp-block-wd-title title\">What Is an Industrial Control Cable?<\/h2>\n\n\n\n<p id=\"wd-88acc2a9\" class=\"wp-block-wd-paragraph\">An industrial control cable connects electrical and automation equipment that exchanges commands, status information or low-voltage electrical signals.<\/p>\n\n\n\n<p id=\"wd-c570a2eb\" class=\"wp-block-wd-paragraph\">Typical connected equipment includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>PLCs<\/li>\n\n\n\n<li>Relays<\/li>\n\n\n\n<li>Contactors<\/li>\n\n\n\n<li>Sensors<\/li>\n\n\n\n<li>Actuators<\/li>\n\n\n\n<li>Solenoid valves<\/li>\n\n\n\n<li>Limit switches<\/li>\n\n\n\n<li>Motor-control equipment<\/li>\n\n\n\n<li>Control panels<\/li>\n\n\n\n<li>Machine interfaces<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-9608041e\" class=\"wp-block-wd-paragraph\">Unlike a power feeder, the primary purpose of many control circuits is not to transfer large amounts of electrical power. Instead, they transmit commands or operating states between different elements of a machine or automation system.<\/p>\n\n\n\n<p id=\"wd-0a8f1567\" class=\"wp-block-wd-paragraph\">However, control cable remains a broad product family. Therefore, the circuit function must be defined before the cable construction can be selected correctly.<\/p>\n\n\n\n<h2 id=\"wd-01c993db\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection Starts with Circuit Function<\/h2>\n\n\n\n<p id=\"wd-5a294b8c\" class=\"wp-block-wd-paragraph\">The first question should be:<\/p>\n\n\n\n<p id=\"wd-e5823f78\" class=\"wp-block-wd-paragraph\"><strong>What does this conductor actually carry?<\/strong><\/p>\n\n\n\n<p id=\"wd-05f21679\" class=\"wp-block-wd-paragraph\">A machine can contain several types of control circuits, including:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Digital inputs<\/li>\n\n\n\n<li>Digital outputs<\/li>\n\n\n\n<li>Relay commands<\/li>\n\n\n\n<li>Contactor commands<\/li>\n\n\n\n<li>Analogue signals<\/li>\n\n\n\n<li>Equipment status signals<\/li>\n\n\n\n<li>Feedback circuits<\/li>\n\n\n\n<li>Low-voltage auxiliary power<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-3ed4f3c3\" class=\"wp-block-wd-paragraph\">For example, a 24 V DC digital output controlling a relay does not necessarily have the same signal-integrity requirements as a low-level analogue feedback circuit.<\/p>\n\n\n\n<p id=\"wd-924a3bad\" class=\"wp-block-wd-paragraph\">Therefore, industrial control cable selection should begin with the electrical function instead of using one cable type across an entire machine.<\/p>\n\n\n\n<h2 id=\"wd-fd9b74c3\" class=\"wp-block-wd-title title\">Control Cable vs Power Cable in Machinery<\/h2>\n\n\n\n<p id=\"wd-117c8514\" class=\"wp-block-wd-paragraph\">Control and power cables can appear beside each other inside industrial machinery, but they perform different functions.<\/p>\n\n\n\n<p id=\"wd-0d7a9a59\" class=\"wp-block-wd-paragraph\">Power cables primarily supply electrical energy to equipment such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Motors<\/li>\n\n\n\n<li>Heaters<\/li>\n\n\n\n<li>Pumps<\/li>\n\n\n\n<li>Large actuators<\/li>\n\n\n\n<li>Machine distribution circuits<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-5df89212\" class=\"wp-block-wd-paragraph\">Control cables, meanwhile, carry commands, switching functions, status information and other automation signals.<\/p>\n\n\n\n<p id=\"wd-16e0b3ab\" class=\"wp-block-wd-paragraph\">As a result, conductor cross-section, voltage rating and electromagnetic requirements can differ significantly.<\/p>\n\n\n\n<p id=\"wd-d095e432\" class=\"wp-block-wd-paragraph\">Therefore, designers should not select a control cable merely because its conductor count matches an available power cable.<\/p>\n\n\n\n<h2 id=\"wd-909e01a7\" class=\"wp-block-wd-title title\">Control Cable vs Instrumentation Cable<\/h2>\n\n\n\n<p id=\"wd-d00ee809\" class=\"wp-block-wd-paragraph\">Instrumentation cable is another product family that can appear inside industrial automation systems.<\/p>\n\n\n\n<p id=\"wd-fbeaa4ff\" class=\"wp-block-wd-paragraph\">Instrumentation cables commonly use twisted pairs or triads and can include individual or overall screens for low-level measurement signals.<\/p>\n\n\n\n<p id=\"wd-3b95d005\" class=\"wp-block-wd-paragraph\">Typical instrumentation applications include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>4\u201320 mA loops<\/li>\n\n\n\n<li>Pressure transmitters<\/li>\n\n\n\n<li>Temperature transmitters<\/li>\n\n\n\n<li>Flow measurement<\/li>\n\n\n\n<li>Process sensors<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-77376de9\" class=\"wp-block-wd-paragraph\">Control cable commonly uses multicore construction for command and switching functions.<\/p>\n\n\n\n<p id=\"wd-ed307df6\" class=\"wp-block-wd-paragraph\">Consequently, a screened multicore control cable should not automatically replace a dedicated instrumentation cable when the circuit requires controlled pair geometry or individual pair screening.<\/p>\n\n\n\n<h2 id=\"wd-5c8a1ab8\" class=\"wp-block-wd-title title\">Conductor Size in Industrial Control Cable Selection<\/h2>\n\n\n\n<p id=\"wd-96ef9794\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> requires an appropriate conductor cross-section for the electrical circuit.<\/p>\n\n\n\n<p id=\"wd-b67aaa51\" class=\"wp-block-wd-paragraph\">Control-cable sizes can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>0.5 mm\u00b2<\/li>\n\n\n\n<li>0.75 mm\u00b2<\/li>\n\n\n\n<li>1.0 mm\u00b2<\/li>\n\n\n\n<li>1.5 mm\u00b2<\/li>\n\n\n\n<li>2.5 mm\u00b2<\/li>\n\n\n\n<li>Larger sizes where required<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-b7434a98\" class=\"wp-block-wd-paragraph\">The correct size depends on factors such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Current<\/li>\n\n\n\n<li>Voltage drop<\/li>\n\n\n\n<li>Route length<\/li>\n\n\n\n<li>Protection device<\/li>\n\n\n\n<li>Equipment requirements<\/li>\n\n\n\n<li>Installation conditions<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-7fa0e8da\" class=\"wp-block-wd-paragraph\">For example, increasing conductor size can reduce voltage drop on a long low-voltage control circuit.<\/p>\n\n\n\n<p id=\"wd-19fd551a\" class=\"wp-block-wd-paragraph\">However, oversized conductors can also increase cable diameter, bending radius and cost. Therefore, conductor sizing should follow the actual electrical requirement.<\/p>\n\n\n\n<h2 id=\"wd-2d1f454b\" class=\"wp-block-wd-title title\">Why Control Cables Use Flexible Conductors<\/h2>\n\n\n\n<p id=\"wd-9b2cd8c7\" class=\"wp-block-wd-paragraph\">Many industrial control cables use finely stranded copper conductors because flexible conductors make routing and termination easier inside machines and control systems.<\/p>\n\n\n\n<p id=\"wd-73c232ac\" class=\"wp-block-wd-paragraph\">IEC conductor classifications can distinguish different conductor constructions, including flexible conductor classes.<\/p>\n\n\n\n<p id=\"wd-b9ee4989\" class=\"wp-block-wd-paragraph\">Class 5 copper conductors are widely encountered in flexible control-cable families.<\/p>\n\n\n\n<p id=\"wd-60a07d66\" class=\"wp-block-wd-paragraph\">For example, a cable routed through a crowded electrical panel can be easier to handle when the conductors and overall cable have greater flexibility.<\/p>\n\n\n\n<p id=\"wd-5bca78f6\" class=\"wp-block-wd-paragraph\">Nevertheless, flexibility during installation does not automatically establish suitability for repeated movement.<\/p>\n\n\n\n<h2 id=\"wd-921343ff\" class=\"wp-block-wd-title title\">Flexible Does Not Automatically Mean Continuous Flex<\/h2>\n\n\n\n<p id=\"wd-d3a7ea68\" class=\"wp-block-wd-paragraph\">This distinction is critical in machinery applications.<\/p>\n\n\n\n<p id=\"wd-98109a28\" class=\"wp-block-wd-paragraph\">A conventional flexible control cable can use stranded conductors and bend easily during installation.<\/p>\n\n\n\n<p id=\"wd-47acef52\" class=\"wp-block-wd-paragraph\">However, a drag-chain cable experiences thousands or millions of repeated bending cycles during operation.<\/p>\n\n\n\n<p id=\"wd-5b0a89fa\" class=\"wp-block-wd-paragraph\">Similarly, robotic cable can experience repeated torsion around several axes.<\/p>\n\n\n\n<p id=\"wd-6789735d\" class=\"wp-block-wd-paragraph\">Therefore:<\/p>\n\n\n\n<p id=\"wd-95bb1890\" class=\"wp-block-wd-paragraph\"><strong>flexible cable \u2260 continuous-flex cable.<\/strong><\/p>\n\n\n\n<p id=\"wd-3728103c\" class=\"wp-block-wd-paragraph\">Industrial control cable selection must identify whether the cable moves only during installation or continuously during machine operation.<\/p>\n\n\n\n<h2 id=\"wd-d5f52879\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Fixed Machinery<\/h2>\n\n\n\n<p id=\"wd-0c65c6a9\" class=\"wp-block-wd-paragraph\">Many control cables inside machinery remain stationary after installation.<\/p>\n\n\n\n<p id=\"wd-d8c791b9\" class=\"wp-block-wd-paragraph\">Typical fixed applications include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Control cabinets<\/li>\n\n\n\n<li>Machine frames<\/li>\n\n\n\n<li>Fixed sensor connections<\/li>\n\n\n\n<li>Relay wiring<\/li>\n\n\n\n<li>Terminal-box connections<\/li>\n\n\n\n<li>Equipment interfaces<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-4109d151\" class=\"wp-block-wd-paragraph\">In these cases, the cable does not need continuous flexing performance.<\/p>\n\n\n\n<p id=\"wd-a19803e7\" class=\"wp-block-wd-paragraph\">Instead, engineers can prioritize core count, conductor size, screening, sheath material and installation environment.<\/p>\n\n\n\n<p id=\"wd-fd5ee230\" class=\"wp-block-wd-paragraph\">Consequently, general flexible control cables such as <a href=\"https:\/\/www.etkkablo.com\/en\/product\/ysly-jz-control-cable\/\">YSLY<\/a>-type constructions can provide practical solutions for many fixed automation circuits.<\/p>\n\n\n\n<h2 id=\"wd-7a7a33e0\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Moving Machinery<\/h2>\n\n\n\n<p id=\"wd-0cc21edd\" class=\"wp-block-wd-paragraph\">Moving machinery creates additional mechanical requirements.<\/p>\n\n\n\n<p id=\"wd-02e1e55f\" class=\"wp-block-wd-paragraph\">A cable can experience:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Repeated bending<\/li>\n\n\n\n<li>Acceleration<\/li>\n\n\n\n<li>Tension<\/li>\n\n\n\n<li>Abrasion<\/li>\n\n\n\n<li>Twisting<\/li>\n\n\n\n<li>Compression<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-be5bd66f\" class=\"wp-block-wd-paragraph\">For example, machine-tool axes, gantries and automated handling systems can move continuously during every production cycle.<\/p>\n\n\n\n<p id=\"wd-5ad1a56a\" class=\"wp-block-wd-paragraph\">Therefore, the cable design must explicitly support the intended movement rather than relying only on a flexible conductor class.<\/p>\n\n\n\n<h2 id=\"wd-bb2618c6\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Drag Chains<\/h2>\n\n\n\n<p id=\"wd-df23305e\" class=\"wp-block-wd-paragraph\">Drag chains guide cables along predictable repeated-motion paths.<\/p>\n\n\n\n<p id=\"wd-09d8f882\" class=\"wp-block-wd-paragraph\">A suitable cable must tolerate:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Repeated flexing<\/li>\n\n\n\n<li>Defined minimum bending radius<\/li>\n\n\n\n<li>Acceleration<\/li>\n\n\n\n<li>Travel speed<\/li>\n\n\n\n<li>Mechanical abrasion<\/li>\n\n\n\n<li>Cycle life<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-37561210\" class=\"wp-block-wd-paragraph\">Moreover, conductor stranding, insulation, core assembly and sheath materials all influence dynamic performance.<\/p>\n\n\n\n<p id=\"wd-5e666f4f\" class=\"wp-block-wd-paragraph\">Consequently, a conventional YSLY-style cable should not automatically be placed in a drag chain unless the specific product documentation confirms suitability for that movement.<\/p>\n\n\n\n<h2 id=\"wd-b54b84f6\" class=\"wp-block-wd-title title\">Control Cable for Robotic Applications<\/h2>\n\n\n\n<p id=\"wd-9b8def0d\" class=\"wp-block-wd-paragraph\">Robotic systems can impose different mechanical loads from ordinary drag chains.<\/p>\n\n\n\n<p id=\"wd-0e36a33d\" class=\"wp-block-wd-paragraph\">For instance, robot arms can combine bending with torsion as several joints rotate simultaneously.<\/p>\n\n\n\n<p id=\"wd-d8c17ab4\" class=\"wp-block-wd-paragraph\">A robotic cable can therefore require:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>High torsional endurance<\/li>\n\n\n\n<li>Flexible conductor design<\/li>\n\n\n\n<li>Special core assembly<\/li>\n\n\n\n<li>Abrasion-resistant sheath<\/li>\n\n\n\n<li>Controlled torsion capability<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-e052d3e6\" class=\"wp-block-wd-paragraph\">Therefore, industrial control cable selection for robotic applications should include torsion data rather than assuming that a continuous-flex cable designed only for linear bending will be sufficient.<\/p>\n\n\n\n<h2 id=\"wd-77f9c6ab\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection: Screened vs Unscreened<\/h2>\n\n\n\n<p id=\"wd-501eb6c0\" class=\"wp-block-wd-paragraph\">Screening becomes another major decision in industrial automation.<\/p>\n\n\n\n<p id=\"wd-895ebf99\" class=\"wp-block-wd-paragraph\">Unscreened control cables can be suitable for conventional command circuits in environments where electromagnetic interference is limited.<\/p>\n\n\n\n<p id=\"wd-e88f0f2b\" class=\"wp-block-wd-paragraph\">Screened cables include a conductive layer intended to reduce electromagnetic interference.<\/p>\n\n\n\n<p id=\"wd-4d2937aa\" class=\"wp-block-wd-paragraph\">Potential screen constructions include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Aluminium\/polyester foil<\/li>\n\n\n\n<li>Tinned copper braid<\/li>\n\n\n\n<li>Bare copper braid<\/li>\n\n\n\n<li>Combined foil and braid<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-b10f54aa\" class=\"wp-block-wd-paragraph\">Therefore, screening should be selected according to signal sensitivity and the surrounding electromagnetic environment rather than specified universally.<\/p>\n\n\n\n<h2 id=\"wd-e3c5d123\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection Near VFDs<\/h2>\n\n\n\n<p id=\"wd-a3276747\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> deserves particular attention around variable-frequency drives.<\/p>\n\n\n\n<p id=\"wd-d1566e4a\" class=\"wp-block-wd-paragraph\">VFDs switch electrical power rapidly to control motor speed. As a result, they can create substantial electromagnetic noise.<\/p>\n\n\n\n<p id=\"wd-ec03fbee\" class=\"wp-block-wd-paragraph\">Sensitive nearby circuits can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Analogue signals<\/li>\n\n\n\n<li>Feedback wiring<\/li>\n\n\n\n<li>Encoder circuits<\/li>\n\n\n\n<li>Low-level sensors<\/li>\n\n\n\n<li>Communication networks<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-f0742181\" class=\"wp-block-wd-paragraph\">Screened control cable can provide additional protection for appropriate circuits.<\/p>\n\n\n\n<p id=\"wd-de101314\" class=\"wp-block-wd-paragraph\">However, cable routing, bonding and separation from power conductors remain important parts of the complete EMC strategy.<\/p>\n\n\n\n<h2 id=\"wd-32562f89\" class=\"wp-block-wd-title title\">Control Cables Near Motors<\/h2>\n\n\n\n<p id=\"wd-e1326c8d\" class=\"wp-block-wd-paragraph\">Motors and motor-power circuits can also influence nearby control wiring.<\/p>\n\n\n\n<p id=\"wd-d526f8f4\" class=\"wp-block-wd-paragraph\">For example, an automation panel can contain feedback circuits only a short distance from high-current motor conductors.<\/p>\n\n\n\n<p id=\"wd-8ad1f32a\" class=\"wp-block-wd-paragraph\">Accordingly, sensitive circuits can benefit from screened construction and appropriate physical separation.<\/p>\n\n\n\n<p id=\"wd-6b77610f\" class=\"wp-block-wd-paragraph\">Meanwhile, robust relay commands may require less protection.<\/p>\n\n\n\n<p id=\"wd-912de0ce\" class=\"wp-block-wd-paragraph\">Consequently, machine designers can legitimately use screened and unscreened control cables within the same equipment.<\/p>\n\n\n\n<h2 id=\"wd-318b543b\" class=\"wp-block-wd-title title\">YSLY for General Industrial Automation<\/h2>\n\n\n\n<p id=\"wd-f555a7c1\" class=\"wp-block-wd-paragraph\">YSLY is a commonly used unscreened flexible PVC control-cable family.<\/p>\n\n\n\n<p id=\"wd-c0136d3d\" class=\"wp-block-wd-paragraph\">Typical applications can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Machine wiring<\/li>\n\n\n\n<li>Control panels<\/li>\n\n\n\n<li>Relay circuits<\/li>\n\n\n\n<li>Automation equipment<\/li>\n\n\n\n<li>Fixed control connections<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-6cc420f8\" class=\"wp-block-wd-paragraph\">Its multicore construction can provide an economical solution when additional electromagnetic screening is unnecessary.<\/p>\n\n\n\n<p id=\"wd-ef10f109\" class=\"wp-block-wd-paragraph\">However, the exact voltage, temperature, movement and environmental capabilities should be verified from the product datasheet.<\/p>\n\n\n\n<h2 id=\"wd-c6639108\" class=\"wp-block-wd-title title\">YSLYCY for Screened Industrial Control<\/h2>\n\n\n\n<p id=\"wd-bd073134\" class=\"wp-block-wd-paragraph\"><a href=\"https:\/\/www.etkkablo.com\/en\/product\/yslcy-jz-control-cable\/\">YSLYCY <\/a>and related screened control-cable constructions provide additional electromagnetic protection for suitable automation circuits.<\/p>\n\n\n\n<p id=\"wd-2fad93d2\" class=\"wp-block-wd-paragraph\">Screened constructions can be useful near:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>VFDs<\/li>\n\n\n\n<li>Motors<\/li>\n\n\n\n<li>Power cables<\/li>\n\n\n\n<li>Transformers<\/li>\n\n\n\n<li>Switchgear<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-b8d8d8d2\" class=\"wp-block-wd-paragraph\">Moreover, screening can support signal integrity for sensitive feedback and control functions.<\/p>\n\n\n\n<p id=\"wd-48e9b4b3\" class=\"wp-block-wd-paragraph\">Nevertheless, a screened multicore control cable should not automatically replace protocol-specific communication or instrumentation cable.<\/p>\n\n\n\n<h2 id=\"wd-1b917744\" class=\"wp-block-wd-title title\"><a href=\"https:\/\/www.etkkablo.com\/en\/product\/yslcy-jz-control-cable\/\">YSLCY<\/a> and Other Screened Variants<\/h2>\n\n\n\n<p id=\"wd-f3a88c92\" class=\"wp-block-wd-paragraph\">Industrial control-cable portfolios can include several screened constructions.<\/p>\n\n\n\n<p id=\"wd-84dd1b2e\" class=\"wp-block-wd-paragraph\">For example, cable families can differ in whether they use:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Foil screen<\/li>\n\n\n\n<li>Copper braid<\/li>\n\n\n\n<li>Foil plus braid<\/li>\n\n\n\n<li>Different insulation materials<\/li>\n\n\n\n<li>Different sheath systems<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-35033b00\" class=\"wp-block-wd-paragraph\">Therefore, product designation alone should not replace the construction table.<\/p>\n\n\n\n<p id=\"wd-c5b3b802\" class=\"wp-block-wd-paragraph\">Buyers should confirm the actual screen material, coverage and drain-wire arrangement where these parameters matter.<\/p>\n\n\n\n<h2 id=\"wd-7be939c7\" class=\"wp-block-wd-title title\">HSLH for Halogen-Free Machinery Applications<\/h2>\n\n\n\n<p id=\"wd-7d359ea8\" class=\"wp-block-wd-paragraph\"><a href=\"https:\/\/www.etkkablo.com\/en\/product\/hslh-jz-control-cable\/\">HSLH<\/a> represents a halogen-free control-cable construction for suitable applications.<\/p>\n\n\n\n<p id=\"wd-d24e4aa6\" class=\"wp-block-wd-paragraph\">LSZH materials can be important in environments where smoke and corrosive combustion products need to be reduced.<\/p>\n\n\n\n<p id=\"wd-99419abd\" class=\"wp-block-wd-paragraph\">Potential applications can include machinery installed in:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Airports<\/li>\n\n\n\n<li>Hospitals<\/li>\n\n\n\n<li>Metro facilities<\/li>\n\n\n\n<li>Public buildings<\/li>\n\n\n\n<li>Data centers<\/li>\n\n\n\n<li>Commercial infrastructure<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-088fe1ac\" class=\"wp-block-wd-paragraph\">However, LSZH does not determine whether the cable is screened or suitable for repeated movement.<\/p>\n\n\n\n<p id=\"wd-c856bbd4\" class=\"wp-block-wd-paragraph\">Therefore, material, EMC and mechanical requirements must remain separate specification parameters.<\/p>\n\n\n\n<h2 id=\"wd-dc332ac7\" class=\"wp-block-wd-title title\">Screened Halogen-Free Control Cable<\/h2>\n\n\n\n<p id=\"wd-adea9167\" class=\"wp-block-wd-paragraph\">Halogen-free materials can also be combined with electromagnetic screening.<\/p>\n\n\n\n<p id=\"wd-43f5b07c\" class=\"wp-block-wd-paragraph\">This allows a cable to address both:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Fire-related material requirements<\/li>\n\n\n\n<li>EMI protection<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-55316fba\" class=\"wp-block-wd-paragraph\">For example, <a href=\"https:\/\/www.etkkablo.com\/en\/product\/hslch-jz-control-cable\/\">HSLCH<\/a> or <a href=\"https:\/\/www.etkkablo.com\/en\/product\/hslhch-jz-control-cable\/\">HSLHCH<\/a>-type constructions can provide screened halogen-free options depending on the exact product design.<\/p>\n\n\n\n<p id=\"wd-61cdac92\" class=\"wp-block-wd-paragraph\">Consequently, engineers do not need to choose between LSZH construction and screening when both are technically required.<\/p>\n\n\n\n<h2 id=\"wd-17301189\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for PLC Systems<\/h2>\n\n\n\n<p id=\"wd-e6ba02a6\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> for PLC-based systems depends on the specific I\/O circuit.<\/p>\n\n\n\n<p id=\"wd-211871a3\" class=\"wp-block-wd-paragraph\">A PLC cabinet can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Digital inputs<\/li>\n\n\n\n<li>Digital outputs<\/li>\n\n\n\n<li>Analogue inputs<\/li>\n\n\n\n<li>Analogue outputs<\/li>\n\n\n\n<li>Relay outputs<\/li>\n\n\n\n<li>Communication modules<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-c4cb9933\" class=\"wp-block-wd-paragraph\">Digital I\/O can often use multicore control cable.<\/p>\n\n\n\n<p id=\"wd-c72791a3\" class=\"wp-block-wd-paragraph\">By contrast, analogue signals can justify twisted or screened constructions depending on equipment requirements and noise conditions.<\/p>\n\n\n\n<p id=\"wd-f561fea6\" class=\"wp-block-wd-paragraph\">Meanwhile, Ethernet, RS-485, Profibus or other communication interfaces require their own protocol-appropriate cable designs.<\/p>\n\n\n\n<h2 id=\"wd-33527fb6\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Sensors<\/h2>\n\n\n\n<p id=\"wd-7ca5d298\" class=\"wp-block-wd-paragraph\">Sensors can generate very different electrical outputs.<\/p>\n\n\n\n<p id=\"wd-67009b89\" class=\"wp-block-wd-paragraph\">Examples include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>24 V switching output<\/li>\n\n\n\n<li>0\u201310 V<\/li>\n\n\n\n<li>4\u201320 mA<\/li>\n\n\n\n<li>Pulse output<\/li>\n\n\n\n<li>Digital communication<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-fcc25bf7\" class=\"wp-block-wd-paragraph\">Therefore, \u201csensor cable\u201d does not identify one universal product.<\/p>\n\n\n\n<p id=\"wd-849f7bec\" class=\"wp-block-wd-paragraph\">A simple proximity switch can require a different cable from a precision analogue sensor or networked field device.<\/p>\n\n\n\n<p id=\"wd-a62a2d95\" class=\"wp-block-wd-paragraph\">Consequently, the sensor datasheet should determine the electrical cable requirements.<\/p>\n\n\n\n<h2 id=\"wd-7680576c\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Actuators<\/h2>\n\n\n\n<p id=\"wd-d460cb0f\" class=\"wp-block-wd-paragraph\">Actuators can also use several control methods.<\/p>\n\n\n\n<p id=\"wd-3687358d\" class=\"wp-block-wd-paragraph\">For example, equipment can require:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Simple on\/off command<\/li>\n\n\n\n<li>Open\/close control<\/li>\n\n\n\n<li>0\u201310 V positioning<\/li>\n\n\n\n<li>Three-point floating control<\/li>\n\n\n\n<li>Digital communication<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-5f78b130\" class=\"wp-block-wd-paragraph\">Accordingly, conductor count and signal type can vary substantially.<\/p>\n\n\n\n<p id=\"wd-3dfb5a31\" class=\"wp-block-wd-paragraph\">Industrial control cable selection should therefore account for both command wiring and any position-feedback circuits.<\/p>\n\n\n\n<h2 id=\"wd-d4843574\" class=\"wp-block-wd-title title\">Control Cable for Solenoid Valves<\/h2>\n\n\n\n<p id=\"wd-072fa50c\" class=\"wp-block-wd-paragraph\">Solenoid valves are common throughout industrial automation.<\/p>\n\n\n\n<p id=\"wd-da7cea7d\" class=\"wp-block-wd-paragraph\">The cable can carry switching voltage from a PLC output, relay or valve terminal unit.<\/p>\n\n\n\n<p id=\"wd-5eeae20a\" class=\"wp-block-wd-paragraph\">Important parameters can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Operating voltage<\/li>\n\n\n\n<li>Current<\/li>\n\n\n\n<li>Route length<\/li>\n\n\n\n<li>Conductor size<\/li>\n\n\n\n<li>Number of valves<\/li>\n\n\n\n<li>Environmental exposure<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-0a5de4d2\" class=\"wp-block-wd-paragraph\">Moreover, oil, chemicals or moisture around process equipment can influence sheath selection.<\/p>\n\n\n\n<h2 id=\"wd-68a0cf31\" class=\"wp-block-wd-title title\">Control Cable for Relays and Contactors<\/h2>\n\n\n\n<p id=\"wd-5880025b\" class=\"wp-block-wd-paragraph\">Relay and contactor circuits are among the most conventional control-cable applications.<\/p>\n\n\n\n<p id=\"wd-3969b4e9\" class=\"wp-block-wd-paragraph\">These circuits often use robust switching signals rather than low-level precision measurements.<\/p>\n\n\n\n<p id=\"wd-7e627fc9\" class=\"wp-block-wd-paragraph\">Therefore, unscreened multicore control cable can frequently provide an efficient solution when the surrounding EMI environment is acceptable.<\/p>\n\n\n\n<p id=\"wd-0b4acd6e\" class=\"wp-block-wd-paragraph\">However, the cable must still satisfy voltage, current, temperature and installation requirements.<\/p>\n\n\n\n<h2 id=\"wd-e80330d9\" class=\"wp-block-wd-title title\">Control Cable for Feedback Systems<\/h2>\n\n\n\n<p id=\"wd-94ad6241\" class=\"wp-block-wd-paragraph\">Feedback circuits can be more sensitive to interference than simple command circuits.<\/p>\n\n\n\n<p id=\"wd-90501d44\" class=\"wp-block-wd-paragraph\">Applications can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Position feedback<\/li>\n\n\n\n<li>Speed feedback<\/li>\n\n\n\n<li>Analogue measurements<\/li>\n\n\n\n<li>Machine condition signals<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-853c4c8b\" class=\"wp-block-wd-paragraph\">For this reason, screened cable can become more relevant.<\/p>\n\n\n\n<p id=\"wd-12318b7c\" class=\"wp-block-wd-paragraph\">Nevertheless, specialized encoder or instrumentation cables may be more appropriate when the equipment manufacturer requires controlled electrical characteristics.<\/p>\n\n\n\n<h2 id=\"wd-bb6d3364\" class=\"wp-block-wd-title title\">Encoder Cable vs General Control Cable<\/h2>\n\n\n\n<p id=\"wd-5cefe144\" class=\"wp-block-wd-paragraph\">An encoder cable can carry high-frequency pulse or digital feedback signals.<\/p>\n\n\n\n<p id=\"wd-4de1772c\" class=\"wp-block-wd-paragraph\">Therefore, it can require specific:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Pair geometry<\/li>\n\n\n\n<li>Shielding<\/li>\n\n\n\n<li>Capacitance<\/li>\n\n\n\n<li>Impedance<\/li>\n\n\n\n<li>Conductor arrangement<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-5da2cca4\" class=\"wp-block-wd-paragraph\">A generic screened control cable does not automatically satisfy those requirements.<\/p>\n\n\n\n<p id=\"wd-7c6ca8d6\" class=\"wp-block-wd-paragraph\">Consequently, machine builders should follow the encoder manufacturer&#8217;s cable specification rather than selecting cable only by core count.<\/p>\n\n\n\n<h2 id=\"wd-6873a28d\" class=\"wp-block-wd-title title\">Oil Resistance in Industrial Control Cable Selection<\/h2>\n\n\n\n<p id=\"wd-51c1899b\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> often requires consideration of oils and lubricants.<\/p>\n\n\n\n<p id=\"wd-0be16030\" class=\"wp-block-wd-paragraph\">Machinery environments can expose cable jackets to:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Hydraulic oil<\/li>\n\n\n\n<li>Lubricating oil<\/li>\n\n\n\n<li>Cutting fluids<\/li>\n\n\n\n<li>Grease<\/li>\n\n\n\n<li>Cleaning chemicals<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-46e7f1d0\" class=\"wp-block-wd-paragraph\">Long-term exposure can affect unsuitable sheath materials.<\/p>\n\n\n\n<p id=\"wd-e1c5d4fd\" class=\"wp-block-wd-paragraph\">Therefore, the actual chemical environment should be identified before approving a control cable for machine use.<\/p>\n\n\n\n<h2 id=\"wd-2c642b65\" class=\"wp-block-wd-title title\">PVC Sheath for Industrial Control Cable<\/h2>\n\n\n\n<p id=\"wd-49aa2612\" class=\"wp-block-wd-paragraph\">PVC provides a practical material system for many general-purpose control-cable applications.<\/p>\n\n\n\n<p id=\"wd-68a50917\" class=\"wp-block-wd-paragraph\">Advantages can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Good general flexibility<\/li>\n\n\n\n<li>Cost efficiency<\/li>\n\n\n\n<li>Ease of processing<\/li>\n\n\n\n<li>Availability across many multicore constructions<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-e800eaa2\" class=\"wp-block-wd-paragraph\">However, PVC formulations vary in resistance to oil, temperature and chemicals.<\/p>\n\n\n\n<p id=\"wd-04e88810\" class=\"wp-block-wd-paragraph\">Consequently, the presence of a PVC sheath alone does not establish suitability for every industrial environment.<\/p>\n\n\n\n<h2 id=\"wd-14dfc82f\" class=\"wp-block-wd-title title\">PUR Control Cable for Demanding Machinery<\/h2>\n\n\n\n<p id=\"wd-3d559c91\" class=\"wp-block-wd-paragraph\">Polyurethane, commonly abbreviated as PUR, can provide strong abrasion and mechanical characteristics for appropriate machinery applications.<\/p>\n\n\n\n<p id=\"wd-96bee3aa\" class=\"wp-block-wd-paragraph\">Depending on formulation, PUR can also offer useful resistance to oils and industrial exposure.<\/p>\n\n\n\n<p id=\"wd-85e47035\" class=\"wp-block-wd-paragraph\">Therefore, PUR-sheathed control cables can be considered for demanding machine environments and dynamic applications when the complete cable construction is designed accordingly.<\/p>\n\n\n\n<p id=\"wd-1f65410c\" class=\"wp-block-wd-paragraph\">However, a PUR sheath by itself does not guarantee drag-chain or robotic performance. The conductor and core design must also support the intended movement.<\/p>\n\n\n\n<h2 id=\"wd-5955d1a0\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Wet Areas<\/h2>\n\n\n\n<p id=\"wd-5b73a7cc\" class=\"wp-block-wd-paragraph\">Moisture can influence cable performance and long-term durability.<\/p>\n\n\n\n<p id=\"wd-8b907ba4\" class=\"wp-block-wd-paragraph\">For example, machinery used in food processing, washing systems or outdoor installations can experience frequent water exposure.<\/p>\n\n\n\n<p id=\"wd-d1d6bade\" class=\"wp-block-wd-paragraph\">Therefore, engineers should verify:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Sheath water resistance<\/li>\n\n\n\n<li>Ingress conditions<\/li>\n\n\n\n<li>Temperature<\/li>\n\n\n\n<li>Chemical cleaning agents<\/li>\n\n\n\n<li>Connector sealing<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-84a37dbd\" class=\"wp-block-wd-paragraph\">Meanwhile, a cable suitable for occasional damp conditions should not automatically be considered suitable for permanent immersion.<\/p>\n\n\n\n<h2 id=\"wd-6faa90b8\" class=\"wp-block-wd-title title\">Outdoor Control Cable for Machinery<\/h2>\n\n\n\n<p id=\"wd-c329aea6\" class=\"wp-block-wd-paragraph\">Outdoor machinery adds environmental stresses that indoor cable may not encounter.<\/p>\n\n\n\n<p id=\"wd-99ae211c\" class=\"wp-block-wd-paragraph\">Potential requirements include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>UV resistance<\/li>\n\n\n\n<li>Temperature resistance<\/li>\n\n\n\n<li>Moisture resistance<\/li>\n\n\n\n<li>Mechanical protection<\/li>\n\n\n\n<li>Weather-resistant sheath<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-aa91be95\" class=\"wp-block-wd-paragraph\">As a result, standard indoor grey PVC control cable should not automatically be used outdoors without confirming the product&#8217;s environmental capability.<\/p>\n\n\n\n<h2 id=\"wd-05abe67a\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Temperature Requirements<\/h2>\n\n\n\n<p id=\"wd-f100eecb\" class=\"wp-block-wd-paragraph\">Industrial machinery can operate across a wide temperature range.<\/p>\n\n\n\n<p id=\"wd-3ee9c3cf\" class=\"wp-block-wd-paragraph\">For example, cable near furnaces, industrial ovens or process equipment can experience elevated ambient temperatures.<\/p>\n\n\n\n<p id=\"wd-98a2b737\" class=\"wp-block-wd-paragraph\">Meanwhile, outdoor machinery can face low winter temperatures.<\/p>\n\n\n\n<p id=\"wd-8831df52\" class=\"wp-block-wd-paragraph\">Therefore, both operating and installation temperature ranges should be checked.<\/p>\n\n\n\n<p id=\"wd-f4f580c3\" class=\"wp-block-wd-paragraph\">A cable can remain electrically suitable yet become difficult to install or mechanically vulnerable outside its permitted temperature range.<\/p>\n\n\n\n<h2 id=\"wd-a7f117cb\" class=\"wp-block-wd-title title\">Minimum Bending Radius<\/h2>\n\n\n\n<p id=\"wd-81fc981c\" class=\"wp-block-wd-paragraph\">Bending a cable too tightly can damage conductors, insulation, screen layers or the outer sheath.<\/p>\n\n\n\n<p id=\"wd-cbc0e747\" class=\"wp-block-wd-paragraph\">Therefore, manufacturers specify minimum bending-radius requirements.<\/p>\n\n\n\n<p id=\"wd-ec35c5cf\" class=\"wp-block-wd-paragraph\">The required radius can differ between:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Fixed installation<\/li>\n\n\n\n<li>Occasional movement<\/li>\n\n\n\n<li>Continuous flexing<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-0f7d176e\" class=\"wp-block-wd-paragraph\">Consequently, machine design should provide sufficient routing space rather than forcing the cable around excessively tight corners.<\/p>\n\n\n\n<h2 id=\"wd-e0138dd5\" class=\"wp-block-wd-title title\">Core Count in Industrial Control Cable Selection<\/h2>\n\n\n\n<p id=\"wd-61020f1b\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> also requires the correct number of cores.<\/p>\n\n\n\n<p id=\"wd-5b62cae2\" class=\"wp-block-wd-paragraph\">Machine-control cables can contain:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>A few conductors for simple equipment<\/li>\n\n\n\n<li>Multiple cores for actuators or interfaces<\/li>\n\n\n\n<li>High core counts for complex control panels<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-cc792654\" class=\"wp-block-wd-paragraph\">Additional spare conductors can sometimes provide future flexibility.<\/p>\n\n\n\n<p id=\"wd-a07461ce\" class=\"wp-block-wd-paragraph\">However, unnecessary cores increase diameter, weight and cost.<\/p>\n\n\n\n<p id=\"wd-fa814ee7\" class=\"wp-block-wd-paragraph\">Therefore, cable schedules should balance current circuit requirements with reasonable future needs.<\/p>\n\n\n\n<h2 id=\"wd-b0c4c6a3\" class=\"wp-block-wd-title title\">Numbered Cores vs Colour-Coded Cores<\/h2>\n\n\n\n<p id=\"wd-884a34df\" class=\"wp-block-wd-paragraph\">Core identification becomes increasingly important as conductor count grows.<\/p>\n\n\n\n<p id=\"wd-01e15d78\" class=\"wp-block-wd-paragraph\">Industrial control cables can use:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Numbered black cores<\/li>\n\n\n\n<li>Colour-coded conductors<\/li>\n\n\n\n<li>Green\/yellow protective conductor where applicable<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-287e3117\" class=\"wp-block-wd-paragraph\">Number coding can simplify identification in cables with many conductors.<\/p>\n\n\n\n<p id=\"wd-6fbb3fd5\" class=\"wp-block-wd-paragraph\">Meanwhile, colour coding can be convenient for smaller or standardized circuits.<\/p>\n\n\n\n<p id=\"wd-21380b4b\" class=\"wp-block-wd-paragraph\">Consequently, JZ, OZ and related core-identification conventions should be understood when preparing purchase specifications.<\/p>\n\n\n\n<h2 id=\"wd-23f8a47d\" class=\"wp-block-wd-title title\">What Does JZ Mean?<\/h2>\n\n\n\n<p id=\"wd-dc7789f1\" class=\"wp-block-wd-paragraph\">In commonly used German-style control-cable designations, JZ generally indicates numbered conductors together with a green\/yellow protective conductor.<\/p>\n\n\n\n<p id=\"wd-e02eba4f\" class=\"wp-block-wd-paragraph\">This arrangement can be useful when the cable includes a protective-earth connection.<\/p>\n\n\n\n<p id=\"wd-82bdaee6\" class=\"wp-block-wd-paragraph\">However, naming conventions should always be confirmed against the manufacturer&#8217;s datasheet.<\/p>\n\n\n\n<p id=\"wd-1b3547f1\" class=\"wp-block-wd-paragraph\">Therefore, engineers should avoid relying entirely on a short product code without reviewing the conductor identification table.<\/p>\n\n\n\n<h2 id=\"wd-b08caa51\" class=\"wp-block-wd-title title\">What Does OZ Mean?<\/h2>\n\n\n\n<p id=\"wd-ba6ed2ba\" class=\"wp-block-wd-paragraph\">OZ generally refers to a numbered-core construction without a green\/yellow protective conductor in commonly used cable designations.<\/p>\n\n\n\n<p id=\"wd-e030a1fb\" class=\"wp-block-wd-paragraph\">This can suit circuits where a PE conductor is not required inside the same control cable.<\/p>\n\n\n\n<p id=\"wd-29fc9202\" class=\"wp-block-wd-paragraph\">Consequently, choosing JZ or OZ should reflect the actual electrical circuit rather than product availability.<\/p>\n\n\n\n<h2 id=\"wd-25f43abb\" class=\"wp-block-wd-title title\">Voltage Rating in Industrial Control Cable Selection<\/h2>\n\n\n\n<p id=\"wd-d1237874\" class=\"wp-block-wd-paragraph\">The cable&#8217;s rated voltage must exceed the requirements of the intended circuit under the applicable installation rules.<\/p>\n\n\n\n<p id=\"wd-aea57896\" class=\"wp-block-wd-paragraph\">Control-cable families can be designed for ratings such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>300\/500 V<\/li>\n\n\n\n<li>450\/750 V<\/li>\n\n\n\n<li>Other application-specific ratings<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-fc00bd20\" class=\"wp-block-wd-paragraph\">For example, ETK&#8217;s current control-cable portfolio includes standard constructions as well as 0.45\/0.75 kV variants.<\/p>\n\n\n\n<p id=\"wd-a99ae3b9\" class=\"wp-block-wd-paragraph\">Therefore, buyers should specify rated voltage explicitly rather than assuming every cable with the same family name has the same rating.<\/p>\n\n\n\n<h2 id=\"wd-c4d77900\" class=\"wp-block-wd-title title\">Current IEC Control Cable Requirements<\/h2>\n\n\n\n<p id=\"wd-03cb1f7a\" class=\"wp-block-wd-paragraph\">IEC 60227-7:2024 covers particular requirements for PVC-insulated screened and unscreened control cables with rated voltages up to and including 300\/500 V within its scope.<\/p>\n\n\n\n<p id=\"wd-d24d0fd4\" class=\"wp-block-wd-paragraph\">Therefore, the standard provides a current international reference for relevant flexible control-cable constructions.<\/p>\n\n\n\n<p id=\"wd-7d56f9a5\" class=\"wp-block-wd-paragraph\">Meanwhile, conductor requirements can reference IEC 60228 where applicable to the product design.<\/p>\n\n\n\n<p id=\"wd-bd508e9e\" class=\"wp-block-wd-paragraph\">However, not every industrial control cable belongs to IEC 60227-7. Project specifications should identify the actual standard applicable to the selected product.<\/p>\n\n\n\n<h2 id=\"wd-1b3464f7\" class=\"wp-block-wd-title title\">Fire Performance in Industrial Control Cable Selection<\/h2>\n\n\n\n<p id=\"wd-a7719cac\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> can also include fire-performance requirements.<\/p>\n\n\n\n<p id=\"wd-d848d6f1\" class=\"wp-block-wd-paragraph\">For fixed cables installed within buildings, project specifications can address:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Flame propagation<\/li>\n\n\n\n<li>LSZH materials<\/li>\n\n\n\n<li>Smoke production<\/li>\n\n\n\n<li>Acidity<\/li>\n\n\n\n<li>CPR classification where applicable<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-7c89a70c\" class=\"wp-block-wd-paragraph\">However, fire performance should not be confused with electromagnetic screening or mechanical flexibility.<\/p>\n\n\n\n<p id=\"wd-fe073607\" class=\"wp-block-wd-paragraph\">Each characteristic addresses a different project requirement.<\/p>\n\n\n\n<h2 id=\"wd-bb714932\" class=\"wp-block-wd-title title\">IEC 60332 and Flame Propagation<\/h2>\n\n\n\n<p id=\"wd-bc186604\" class=\"wp-block-wd-paragraph\">IEC 60332-1-2 provides a test method for vertical flame propagation on a single insulated wire or cable using a 1 kW premixed flame.<\/p>\n\n\n\n<p id=\"wd-6501d56c\" class=\"wp-block-wd-paragraph\">The current edition is IEC 60332-1-2:2025.<\/p>\n\n\n\n<p id=\"wd-f6f3fe11\" class=\"wp-block-wd-paragraph\">Therefore, specifications should avoid continuing to reference superseded editions without considering current project requirements.<\/p>\n\n\n\n<p id=\"wd-657600ad\" class=\"wp-block-wd-paragraph\">Nevertheless, passing a single-cable flame test does not automatically establish the complete fire behaviour required for every industrial installation.<\/p>\n\n\n\n<h2 id=\"wd-aece2b99\" class=\"wp-block-wd-title title\">LSZH Control Cable for Machinery<\/h2>\n\n\n\n<p id=\"wd-83a6c59b\" class=\"wp-block-wd-paragraph\">LSZH cable can be selected where reducing smoke and halogen-containing combustion products is important.<\/p>\n\n\n\n<p id=\"wd-4cf745ca\" class=\"wp-block-wd-paragraph\">Examples can include machinery installed inside:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Airports<\/li>\n\n\n\n<li>Hospitals<\/li>\n\n\n\n<li>Transport buildings<\/li>\n\n\n\n<li>Data centers<\/li>\n\n\n\n<li>Public facilities<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-b57d48c2\" class=\"wp-block-wd-paragraph\">However, many industrial plants can still use PVC control cables where the project permits them.<\/p>\n\n\n\n<p id=\"wd-1670baee\" class=\"wp-block-wd-paragraph\">Therefore, LSZH should be specified according to the fire strategy rather than treated as an automatic requirement for all automation systems.<\/p>\n\n\n\n<h2 id=\"wd-9fccf0e3\" class=\"wp-block-wd-title title\">CPR and Industrial Machinery Control Cable<\/h2>\n\n\n\n<p id=\"wd-24197dc9\" class=\"wp-block-wd-paragraph\">CPR becomes relevant to cables placed on the market for permanent incorporation into applicable European construction works.<\/p>\n\n\n\n<p id=\"wd-a085026f\" class=\"wp-block-wd-paragraph\">However, machinery and building installation can create different regulatory contexts.<\/p>\n\n\n\n<p id=\"wd-8ef8872b\" class=\"wp-block-wd-paragraph\">Therefore, engineers should determine whether a particular control cable forms part of the building installation and falls within the applicable CPR requirement rather than assigning a Euroclass automatically to every machine cable.<\/p>\n\n\n\n<h2 id=\"wd-c08840e0\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Factory Automation<\/h2>\n\n\n\n<p id=\"wd-2d6bd735\" class=\"wp-block-wd-paragraph\"><strong>Industrial control cable selection<\/strong> in a factory can involve several cable families operating together.<\/p>\n\n\n\n<p id=\"wd-ed7daf8b\" class=\"wp-block-wd-paragraph\">A production line can include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Unscreened control cables<\/li>\n\n\n\n<li>Screened control cables<\/li>\n\n\n\n<li>Instrumentation cables<\/li>\n\n\n\n<li>Ethernet cables<\/li>\n\n\n\n<li>Fieldbus cables<\/li>\n\n\n\n<li>Motor cables<\/li>\n\n\n\n<li>Power cables<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-a4550283\" class=\"wp-block-wd-paragraph\">Consequently, \u201cautomation cable\u201d should not be treated as one universal product category.<\/p>\n\n\n\n<p id=\"wd-62b3a62a\" class=\"wp-block-wd-paragraph\">The correct cable architecture follows the electrical and communication function of each circuit.<\/p>\n\n\n\n<h2 id=\"wd-b185bb4e\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Packaging Machinery<\/h2>\n\n\n\n<p id=\"wd-1a2e13f1\" class=\"wp-block-wd-paragraph\">Packaging machines can include high numbers of sensors, actuators, motors and control devices within compact spaces.<\/p>\n\n\n\n<p id=\"wd-5ffb8f9f\" class=\"wp-block-wd-paragraph\">As a result, cable selection can require attention to:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Flexibility<\/li>\n\n\n\n<li>EMI<\/li>\n\n\n\n<li>Repeated movement<\/li>\n\n\n\n<li>Core count<\/li>\n\n\n\n<li>Abrasion<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-51b903cd\" class=\"wp-block-wd-paragraph\">Furthermore, high machine speeds can increase the mechanical demands on cables installed in moving sections.<\/p>\n\n\n\n<p id=\"wd-de65fd38\" class=\"wp-block-wd-paragraph\">Therefore, fixed and moving cable routes should be specified separately.<\/p>\n\n\n\n<h2 id=\"wd-cad42faf\" class=\"wp-block-wd-title title\">Control Cables for Conveyor Systems<\/h2>\n\n\n\n<p id=\"wd-f92627a3\" class=\"wp-block-wd-paragraph\">Conveyors can use control circuits for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Photoelectric sensors<\/li>\n\n\n\n<li>Limit switches<\/li>\n\n\n\n<li>Emergency stops<\/li>\n\n\n\n<li>Motor starters<\/li>\n\n\n\n<li>Actuators<\/li>\n\n\n\n<li>Status feedback<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-b27d65ab\" class=\"wp-block-wd-paragraph\">Long conveyor routes can also increase voltage-drop and environmental considerations.<\/p>\n\n\n\n<p id=\"wd-dc8b9d89\" class=\"wp-block-wd-paragraph\">Consequently, conductor size and cable construction should reflect both electrical distance and the surrounding industrial conditions.<\/p>\n\n\n\n<h2 id=\"wd-0e88a9d7\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection for Machine Tools<\/h2>\n\n\n\n<p id=\"wd-50c9db17\" class=\"wp-block-wd-paragraph\">Machine tools can create demanding combinations of motion, coolant exposure, oil and electromagnetic noise.<\/p>\n\n\n\n<p id=\"wd-59c86fec\" class=\"wp-block-wd-paragraph\">Therefore, engineers can need to evaluate:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Oil resistance<\/li>\n\n\n\n<li>Abrasion resistance<\/li>\n\n\n\n<li>Continuous flex capability<\/li>\n\n\n\n<li>Screening<\/li>\n\n\n\n<li>Minimum bend radius<\/li>\n\n\n\n<li>Temperature range<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-25e5e47d\" class=\"wp-block-wd-paragraph\">Moreover, spindle drives and servo systems can generate EMI that affects nearby low-level control wiring.<\/p>\n\n\n\n<h2 id=\"wd-6a26c490\" class=\"wp-block-wd-title title\">Control Cables for Process Machinery<\/h2>\n\n\n\n<p id=\"wd-660a3bf0\" class=\"wp-block-wd-paragraph\">Process machinery often combines conventional control wiring with instrumentation circuits.<\/p>\n\n\n\n<p id=\"wd-077c630d\" class=\"wp-block-wd-paragraph\">For example, the same equipment can contain:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Solenoid valves<\/li>\n\n\n\n<li>Pressure transmitters<\/li>\n\n\n\n<li>Temperature sensors<\/li>\n\n\n\n<li>Pumps<\/li>\n\n\n\n<li>Motorized valves<\/li>\n\n\n\n<li>PLC I\/O<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-8e5c4a78\" class=\"wp-block-wd-paragraph\">Therefore, control cable and instrumentation cable should be selected according to individual circuit functions rather than consolidated into one generic multicore cable.<\/p>\n\n\n\n<h2 id=\"wd-92085609\" class=\"wp-block-wd-title title\">Common Industrial Control Cable Selection Mistakes<\/h2>\n\n\n\n<h3 id=\"wd-ed8f880a\" class=\"wp-block-wd-title title\">1. Using One Cable Type for the Entire Machine<\/h3>\n\n\n\n<p id=\"wd-b06acda8\" class=\"wp-block-wd-paragraph\">Different circuits can require different electrical, EMC and mechanical characteristics.<\/p>\n\n\n\n<h3 id=\"wd-de56c51a\" class=\"wp-block-wd-title title\">2. Assuming Flexible Means Drag-Chain Suitable<\/h3>\n\n\n\n<p id=\"wd-5a8afb32\" class=\"wp-block-wd-paragraph\">Continuous movement requires a cable specifically designed for repeated flexing.<\/p>\n\n\n\n<h3 id=\"wd-ebab4dd4\" class=\"wp-block-wd-title title\">3. Using an Ordinary Drag-Chain Cable for Robotic Torsion<\/h3>\n\n\n\n<p id=\"wd-70fc1c9e\" class=\"wp-block-wd-paragraph\">Linear bending and torsion create different mechanical stresses.<\/p>\n\n\n\n<h3 id=\"wd-86b855d0\" class=\"wp-block-wd-title title\">4. Ignoring EMI Around VFDs<\/h3>\n\n\n\n<p id=\"wd-a346eeaf\" class=\"wp-block-wd-paragraph\">Sensitive signals can require screening and appropriate route separation.<\/p>\n\n\n\n<h3 id=\"wd-d116148e\" class=\"wp-block-wd-title title\">5. Screening Every Circuit Automatically<\/h3>\n\n\n\n<p id=\"wd-ca307e1b\" class=\"wp-block-wd-paragraph\">Robust control circuits may not benefit from additional screening.<\/p>\n\n\n\n<h3 id=\"wd-1a6bdbf3\" class=\"wp-block-wd-title title\">6. Using Screened Control Cable Instead of Instrumentation Cable<\/h3>\n\n\n\n<p id=\"wd-eeb007e6\" class=\"wp-block-wd-paragraph\">Low-level measurement circuits can require dedicated pair or triad constructions.<\/p>\n\n\n\n<h3 id=\"wd-46d99fd8\" class=\"wp-block-wd-title title\">7. Using Control Cable for Ethernet or Fieldbus<\/h3>\n\n\n\n<p id=\"wd-fe8a7cd3\" class=\"wp-block-wd-paragraph\">Protocol-specific networks can require controlled impedance and other transmission parameters.<\/p>\n\n\n\n<h3 id=\"wd-91a9864a\" class=\"wp-block-wd-title title\">8. Ignoring Oil Exposure<\/h3>\n\n\n\n<p id=\"wd-68ef6900\" class=\"wp-block-wd-paragraph\">An unsuitable jacket can deteriorate under long-term chemical exposure.<\/p>\n\n\n\n<h3 id=\"wd-fbb9b900\" class=\"wp-block-wd-title title\">9. Assuming PUR Automatically Means Continuous Flex<\/h3>\n\n\n\n<p id=\"wd-8cad97ee\" class=\"wp-block-wd-paragraph\">Dynamic suitability depends on the complete cable construction.<\/p>\n\n\n\n<h3 id=\"wd-0939fb90\" class=\"wp-block-wd-title title\">10. Using Indoor Cable Outdoors Without Verification<\/h3>\n\n\n\n<p id=\"wd-3e5b4575\" class=\"wp-block-wd-paragraph\">Outdoor installations can require UV, moisture and temperature resistance.<\/p>\n\n\n\n<h3 id=\"wd-304e5707\" class=\"wp-block-wd-title title\">11. Ignoring Minimum Bending Radius<\/h3>\n\n\n\n<p id=\"wd-73d3c52c\" class=\"wp-block-wd-paragraph\">Excessive bending can damage the cable structure.<\/p>\n\n\n\n<h3 id=\"wd-7c98d07a\" class=\"wp-block-wd-title title\">12. Confusing JZ and OZ<\/h3>\n\n\n\n<p id=\"wd-a1016a92\" class=\"wp-block-wd-paragraph\">The presence of a green\/yellow protective conductor should match the circuit design.<\/p>\n\n\n\n<h3 id=\"wd-eef84b11\" class=\"wp-block-wd-title title\">13. Selecting Conductor Size Only by Habit<\/h3>\n\n\n\n<p id=\"wd-68b7979b\" class=\"wp-block-wd-paragraph\">Current, voltage drop and route length should determine the required cross-section.<\/p>\n\n\n\n<h3 id=\"wd-7305ef01\" class=\"wp-block-wd-title title\">14. Assuming LSZH Means Flame Resistant<\/h3>\n\n\n\n<p id=\"wd-c190a6c2\" class=\"wp-block-wd-paragraph\">Material composition and fire-test performance are separate characteristics.<\/p>\n\n\n\n<h3 id=\"wd-5176817f\" class=\"wp-block-wd-title title\">15. Assuming CPR Class Determines Machinery Suitability<\/h3>\n\n\n\n<p id=\"wd-8a578578\" class=\"wp-block-wd-paragraph\">Reaction-to-fire classification does not establish mechanical or automation performance.<\/p>\n\n\n\n<h3 id=\"wd-73e22732\" class=\"wp-block-wd-title title\">16. Ignoring Connector and Gland Compatibility<\/h3>\n\n\n\n<p id=\"wd-50668482\" class=\"wp-block-wd-paragraph\">Outside diameter and screen termination can affect accessories.<\/p>\n\n\n\n<h3 id=\"wd-9f2663f6\" class=\"wp-block-wd-title title\">17. Ignoring Installation Temperature<\/h3>\n\n\n\n<p id=\"wd-fd948c5f\" class=\"wp-block-wd-paragraph\">A cable can have different limits for installation and normal operation.<\/p>\n\n\n\n<h3 id=\"wd-1b92babe\" class=\"wp-block-wd-title title\">18. Buying by Cable Code Alone<\/h3>\n\n\n\n<p id=\"wd-0780e889\" class=\"wp-block-wd-paragraph\">The complete technical datasheet should control the final approval.<\/p>\n\n\n\n<h2 id=\"wd-ce888ac3\" class=\"wp-block-wd-title title\">How to Perform Industrial Control Cable Selection<\/h2>\n\n\n\n<h3 id=\"wd-ac9257e8\" class=\"wp-block-wd-title title\">Step 1: Identify the Circuit Function<\/h3>\n\n\n\n<p id=\"wd-18d62569\" class=\"wp-block-wd-paragraph\">Define whether the cable carries digital control, analogue feedback, auxiliary power or another function.<\/p>\n\n\n\n<h3 id=\"wd-ccfe9f2a\" class=\"wp-block-wd-title title\">Step 2: Determine Current and Voltage<\/h3>\n\n\n\n<p id=\"wd-a1b246f6\" class=\"wp-block-wd-paragraph\">Select an appropriate conductor size and cable voltage rating.<\/p>\n\n\n\n<h3 id=\"wd-448d720d\" class=\"wp-block-wd-title title\">Step 3: Define Core Count<\/h3>\n\n\n\n<p id=\"wd-3ff9090f\" class=\"wp-block-wd-paragraph\">Include the required conductors and any justified spare capacity.<\/p>\n\n\n\n<h3 id=\"wd-22113fd9\" class=\"wp-block-wd-title title\">Step 4: Determine Movement<\/h3>\n\n\n\n<p id=\"wd-1ac272f2\" class=\"wp-block-wd-paragraph\">Classify the cable as fixed, occasionally moved, continuously flexed or torsionally moved.<\/p>\n\n\n\n<h3 id=\"wd-347d6471\" class=\"wp-block-wd-title title\">Step 5: Assess EMI<\/h3>\n\n\n\n<p id=\"wd-5a63dbe7\" class=\"wp-block-wd-paragraph\">Identify nearby motors, drives, transformers and power circuits.<\/p>\n\n\n\n<h3 id=\"wd-f42b899a\" class=\"wp-block-wd-title title\">Step 6: Select Screening<\/h3>\n\n\n\n<p id=\"wd-e37919b8\" class=\"wp-block-wd-paragraph\">Where required, choose an appropriate foil, braid or combined-screen construction.<\/p>\n\n\n\n<h3 id=\"wd-eefdaa89\" class=\"wp-block-wd-title title\">Step 7: Review Mechanical Stress<\/h3>\n\n\n\n<p id=\"wd-0d527c6e\" class=\"wp-block-wd-paragraph\">Consider abrasion, tension, crush, bend radius and movement cycles.<\/p>\n\n\n\n<h3 id=\"wd-9fba3397\" class=\"wp-block-wd-title title\">Step 8: Review Chemicals<\/h3>\n\n\n\n<p id=\"wd-057c2ab0\" class=\"wp-block-wd-paragraph\">Identify oils, coolants, cleaning agents and other substances that can contact the cable.<\/p>\n\n\n\n<h3 id=\"wd-01e47b9f\" class=\"wp-block-wd-title title\">Step 9: Choose PVC, LSZH or Special Sheath<\/h3>\n\n\n\n<p id=\"wd-f5c2e922\" class=\"wp-block-wd-paragraph\">Select the material system according to mechanical, fire and environmental requirements.<\/p>\n\n\n\n<h3 id=\"wd-d038f59c\" class=\"wp-block-wd-title title\">Step 10: Review Temperature<\/h3>\n\n\n\n<p id=\"wd-e044f0bc\" class=\"wp-block-wd-paragraph\">Check both operating and installation limits.<\/p>\n\n\n\n<h3 id=\"wd-8cae409f\" class=\"wp-block-wd-title title\">Step 11: Define Fire Performance<\/h3>\n\n\n\n<p id=\"wd-205bf15d\" class=\"wp-block-wd-paragraph\">Specify flame propagation, LSZH or CPR requirements where applicable.<\/p>\n\n\n\n<h3 id=\"wd-4a18859f\" class=\"wp-block-wd-title title\">Step 12: Verify the Datasheet<\/h3>\n\n\n\n<p id=\"wd-1f230af4\" class=\"wp-block-wd-paragraph\">Finally, confirm that every selected parameter appears in the proposed product documentation.<\/p>\n\n\n\n<h2 id=\"wd-d807cd48\" class=\"wp-block-wd-title title\">Industrial Control Cable Selection Checklist for an RFQ<\/h2>\n\n\n\n<p id=\"wd-fc9faf34\" class=\"wp-block-wd-paragraph\">A detailed RFQ makes <strong>industrial control cable selection<\/strong> easier for both buyers and manufacturers.<\/p>\n\n\n\n<p id=\"wd-34f3b9e8\" class=\"wp-block-wd-paragraph\">Useful information includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Machine or automation application<\/li>\n\n\n\n<li>Circuit function<\/li>\n\n\n\n<li>Rated voltage<\/li>\n\n\n\n<li>Conductor cross-section<\/li>\n\n\n\n<li>Number of cores<\/li>\n\n\n\n<li>Conductor class<\/li>\n\n\n\n<li>JZ or OZ identification<\/li>\n\n\n\n<li>Green\/yellow conductor requirement<\/li>\n\n\n\n<li>Screened or unscreened<\/li>\n\n\n\n<li>Required screen type<\/li>\n\n\n\n<li>Fixed or moving installation<\/li>\n\n\n\n<li>Drag-chain requirement where applicable<\/li>\n\n\n\n<li>Torsion requirement where applicable<\/li>\n\n\n\n<li>Minimum bending radius<\/li>\n\n\n\n<li>Required cycle life where applicable<\/li>\n\n\n\n<li>PVC, LSZH or PUR sheath<\/li>\n\n\n\n<li>Oil resistance<\/li>\n\n\n\n<li>Chemical resistance<\/li>\n\n\n\n<li>UV resistance<\/li>\n\n\n\n<li>Operating temperature<\/li>\n\n\n\n<li>Installation temperature<\/li>\n\n\n\n<li>Flame performance<\/li>\n\n\n\n<li>CPR classification where applicable<\/li>\n\n\n\n<li>Outer diameter limitations<\/li>\n\n\n\n<li>Required standards<\/li>\n\n\n\n<li>Packaging length<\/li>\n\n\n\n<li>Cable marking<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-eee9f533\" class=\"wp-block-wd-paragraph\">Consequently, suppliers can compare technically equivalent constructions rather than quoting products based only on a generic request for \u201cautomation cable.\u201d<\/p>\n\n\n\n<h2 id=\"wd-6b1a72df\" class=\"wp-block-wd-title title\">ETK Kablo Solutions for Industrial Control Cable Selection<\/h2>\n\n\n\n<p id=\"wd-ea71385b\" class=\"wp-block-wd-paragraph\">ETK Kablo manufactures a broad range of control cables for automation, machinery, building services and industrial infrastructure.<\/p>\n\n\n\n<p id=\"wd-7bb51ffb\" class=\"wp-block-wd-paragraph\">The current control-cable portfolio includes families such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>YSLY-JZ<\/li>\n\n\n\n<li>HSLH-JZ<\/li>\n\n\n\n<li>YSLCY-JZ<\/li>\n\n\n\n<li>HSLCH-JZ<\/li>\n\n\n\n<li>2YSLCY-JZ<\/li>\n\n\n\n<li>YSLYCY-JZ<\/li>\n\n\n\n<li>HSLHCH-JZ<\/li>\n\n\n\n<li>HSL(St)CH-JZ<\/li>\n\n\n\n<li>Higher-voltage variants<\/li>\n\n\n\n<li>Project-specific constructions<\/li>\n<\/ul>\n\n\n\n<p id=\"wd-1198d935\" class=\"wp-block-wd-paragraph\">Depending on the application, ETK control cables can combine flexible copper conductors with PVC or halogen-free insulation and sheath systems, screened or unscreened construction and different core counts and cross-sections.<\/p>\n\n\n\n<p id=\"wd-331bffbd\" class=\"wp-block-wd-paragraph\">In addition, project-specific solutions can address particular mechanical or environmental requirements where the requested construction falls within the manufacturing and qualification scope.<\/p>\n\n\n\n<p id=\"wd-44e44122\" class=\"wp-block-wd-paragraph\">Therefore, ETK approaches <strong>industrial control cable selection<\/strong> according to circuit function, EMI, mechanical movement, fire requirements and environmental exposure rather than treating every machine connection as the same control-cable application.<\/p>\n\n\n\n<h2 id=\"wd-cd8555b4\" class=\"wp-block-wd-title title\">Frequently Asked Questions About Industrial Control Cable Selection<\/h2>\n\n\n\n<h3 id=\"wd-24c693e6\" class=\"wp-block-wd-title title\">What cable is used for industrial automation?<\/h3>\n\n\n\n<p id=\"wd-f9b9e3a9\" class=\"wp-block-wd-paragraph\">Industrial automation can use control cable, instrumentation cable, Ethernet, fieldbus, motor cable and other cable families depending on the circuit.<\/p>\n\n\n\n<h3 id=\"wd-8d5e0ce1\" class=\"wp-block-wd-title title\">What is the most common general control cable?<\/h3>\n\n\n\n<p id=\"wd-8a634a93\" class=\"wp-block-wd-paragraph\">Flexible multicore YSLY-type cables are widely used for suitable general-purpose machine and control circuits.<\/p>\n\n\n\n<h3 id=\"wd-6c016349\" class=\"wp-block-wd-title title\">When should a control cable be screened?<\/h3>\n\n\n\n<p id=\"wd-402ac287\" class=\"wp-block-wd-paragraph\">Screening can be useful where sensitive signals operate in electrically noisy environments near motors, drives or power equipment.<\/p>\n\n\n\n<h3 id=\"wd-959fe29c\" class=\"wp-block-wd-title title\">Can unscreened control cable be used in machinery?<\/h3>\n\n\n\n<p id=\"wd-4bc62697\" class=\"wp-block-wd-paragraph\">Yes. Unscreened cable can suit conventional command and relay circuits where electromagnetic interference is limited.<\/p>\n\n\n\n<h3 id=\"wd-ce898a46\" class=\"wp-block-wd-title title\">Can YSLY be used for machinery?<\/h3>\n\n\n\n<p id=\"wd-6655b9c8\" class=\"wp-block-wd-paragraph\">Yes, for appropriate applications that fall within the cable&#8217;s electrical, mechanical and environmental ratings.<\/p>\n\n\n\n<h3 id=\"wd-a822844b\" class=\"wp-block-wd-title title\">Can YSLY be used in a drag chain?<\/h3>\n\n\n\n<p id=\"wd-c2cd9cf5\" class=\"wp-block-wd-paragraph\">Do not assume so. The exact cable must be specifically documented for continuous-flex use before installation in a drag chain.<\/p>\n\n\n\n<h3 id=\"wd-9f228cf4\" class=\"wp-block-wd-title title\">Does Class 5 mean continuous flex?<\/h3>\n\n\n\n<p id=\"wd-68ab7a4d\" class=\"wp-block-wd-paragraph\">No. Class 5 describes flexible conductor construction; it does not by itself establish continuous-flex cycle performance.<\/p>\n\n\n\n<h3 id=\"wd-35464205\" class=\"wp-block-wd-title title\">Is PUR cable suitable for drag chains?<\/h3>\n\n\n\n<p id=\"wd-f4d72cec\" class=\"wp-block-wd-paragraph\">PUR can provide useful mechanical properties, but the complete cable must still be designed and rated for continuous movement.<\/p>\n\n\n\n<h3 id=\"wd-49f8b4fe\" class=\"wp-block-wd-title title\">What cable should be used near a VFD?<\/h3>\n\n\n\n<p id=\"wd-05007d04\" class=\"wp-block-wd-paragraph\">The correct cable depends on the circuit. Sensitive control and feedback circuits can require screened construction and careful routing.<\/p>\n\n\n\n<h3 id=\"wd-4784b28f\" class=\"wp-block-wd-title title\">Can screened control cable be used for encoders?<\/h3>\n\n\n\n<p id=\"wd-eff14a83\" class=\"wp-block-wd-paragraph\">Only when it satisfies the encoder manufacturer&#8217;s electrical requirements. Many encoders require dedicated cable constructions.<\/p>\n\n\n\n<h3 id=\"wd-1b5d3f26\" class=\"wp-block-wd-title title\">Can control cable carry 4\u201320 mA signals?<\/h3>\n\n\n\n<p id=\"wd-555405d6\" class=\"wp-block-wd-paragraph\">Some circuits can technically operate over suitable cable, but dedicated twisted and screened instrumentation cable is often preferred where signal integrity is important.<\/p>\n\n\n\n<h3 id=\"wd-e6d22f9a\" class=\"wp-block-wd-title title\">What is JZ control cable?<\/h3>\n\n\n\n<p id=\"wd-bfa0b426\" class=\"wp-block-wd-paragraph\">JZ commonly indicates numbered cores together with a green\/yellow protective conductor in German-style cable naming.<\/p>\n\n\n\n<h3 id=\"wd-b3b7864f\" class=\"wp-block-wd-title title\">What is OZ control cable?<\/h3>\n\n\n\n<p id=\"wd-0c40903e\" class=\"wp-block-wd-paragraph\">OZ commonly indicates numbered cores without a green\/yellow protective conductor.<\/p>\n\n\n\n<h3 id=\"wd-145077ac\" class=\"wp-block-wd-title title\">Should machinery use PVC or LSZH cable?<\/h3>\n\n\n\n<p id=\"wd-3de4e0e3\" class=\"wp-block-wd-paragraph\">The choice depends on the fire strategy, installation environment and project requirements.<\/p>\n\n\n\n<h3 id=\"wd-66fad25c\" class=\"wp-block-wd-title title\">Can control cable be oil resistant?<\/h3>\n\n\n\n<p id=\"wd-b8ef3b12\" class=\"wp-block-wd-paragraph\">Yes. Specific cable constructions can use materials formulated for oil exposure. The relevant resistance should be confirmed in the datasheet.<\/p>\n\n\n\n<h3 id=\"wd-872889b6\" class=\"wp-block-wd-title title\">Can industrial control cable be used outdoors?<\/h3>\n\n\n\n<p id=\"wd-60a408b1\" class=\"wp-block-wd-paragraph\">Only when the product provides the required UV, moisture and temperature resistance.<\/p>\n\n\n\n<h3 id=\"wd-48d1abd6\" class=\"wp-block-wd-title title\">What conductor size should control cable use?<\/h3>\n\n\n\n<p id=\"wd-ab9f5f6c\" class=\"wp-block-wd-paragraph\">Conductor size depends on current, voltage drop, circuit length, protection and connected equipment.<\/p>\n\n\n\n<h3 id=\"wd-95cbf470\" class=\"wp-block-wd-title title\">What voltage rating is used for control cable?<\/h3>\n\n\n\n<p id=\"wd-50d7c21b\" class=\"wp-block-wd-paragraph\">Control-cable families can use different voltage ratings, including 300\/500 V and 450\/750 V constructions. The required rating depends on the circuit and product.<\/p>\n\n\n\n<h3 id=\"wd-3b96d70d\" class=\"wp-block-wd-title title\">Does LSZH mean fire resistant?<\/h3>\n\n\n\n<p id=\"wd-27abecfd\" class=\"wp-block-wd-paragraph\">No. LSZH describes smoke and halogen-related material characteristics rather than continued circuit operation during fire.<\/p>\n\n\n\n<h3 id=\"wd-2313d704\" class=\"wp-block-wd-title title\">Does screened cable provide mechanical protection?<\/h3>\n\n\n\n<p id=\"wd-84a6c048\" class=\"wp-block-wd-paragraph\">Not necessarily. Electromagnetic screening and mechanical armour perform different functions.<\/p>\n\n\n\n<h3 id=\"wd-a89d05b2\" class=\"wp-block-wd-title title\">How should industrial control cable be selected?<\/h3>\n\n\n\n<p id=\"wd-68b68922\" class=\"wp-block-wd-paragraph\">Identify the circuit, voltage, current, core count, movement, EMI environment, mechanical stress, sheath material, fire requirements and environmental exposure before selecting the cable.<\/p>\n\n\n\n<h2 id=\"wd-bde7cffc\" class=\"wp-block-wd-title title\">Conclusion<\/h2>\n\n\n\n<p id=\"wd-7a6bce07\" class=\"wp-block-wd-paragraph\">Effective <strong>industrial control cable selection<\/strong> starts by treating each automation circuit according to its actual electrical and mechanical function.<\/p>\n\n\n\n<p id=\"wd-e23eecfe\" class=\"wp-block-wd-paragraph\">General relay and command circuits can often use economical unscreened multicore control cables. Meanwhile, sensitive signals operating near motors, VFDs and power equipment can require additional electromagnetic screening.<\/p>\n\n\n\n<p id=\"wd-ccfe04ad\" class=\"wp-block-wd-paragraph\">Mechanical conditions are equally important. A flexible Class 5 cable can simplify machine installation, but it should not automatically be treated as a continuous-flex or robotic cable. Drag chains, repeated bending and torsion require purpose-designed constructions.<\/p>\n\n\n\n<p id=\"wd-b540b32b\" class=\"wp-block-wd-paragraph\">Environmental exposure adds another layer to the decision. Oils, coolants, moisture, UV, temperature and abrasion can determine whether PVC, LSZH, PUR or another material system is appropriate.<\/p>\n\n\n\n<h3 id=\"wd-b15b8ebd\" class=\"wp-block-wd-title title\">Match the Cable to the Machine, Not the Other Way Around<\/h3>\n\n\n\n<p id=\"wd-4a09b338\" class=\"wp-block-wd-paragraph\">Engineers should therefore begin with circuit function, followed by conductor size, core count, screening and movement requirements.<\/p>\n\n\n\n<p id=\"wd-8cf49d8c\" class=\"wp-block-wd-paragraph\">Next, mechanical and environmental conditions should define the sheath and cable architecture.<\/p>\n\n\n\n<p id=\"wd-55b37e3d\" class=\"wp-block-wd-paragraph\">Finally, fire performance, core identification, voltage rating and documentation should be verified against the project specification.<\/p>\n\n\n\n<p id=\"wd-43e33ae4\" class=\"wp-block-wd-paragraph\">Ultimately, the best industrial control cable is not the most complex cable available. It is the construction that provides the electrical, EMC, mechanical and environmental performance required by the machine without unnecessary cost or over-specification.<\/p>\n","protected":false},"excerpt":{"rendered":"<p><span class=\"span-reading-time rt-reading-time\" style=\"display: block;\"><span class=\"rt-label rt-prefix\">Reading time: <\/span> <span class=\"rt-time\"> 17<\/span> <span class=\"rt-label rt-postfix\">minutes<\/span><\/span>Application Condition Typical Cable Requirement Main Selection Factor General relay and command circuits Unscreened multicore control cable Core count and<\/p>\n","protected":false},"author":5,"featured_media":5897,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[87],"tags":[],"class_list":["post-5896","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog-posts"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v26.1.1 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Industrial Control Cable Selection for Machinery<\/title>\n<meta name=\"description\" content=\"Industrial control cable selection guide: compare YSLY, shielding, VFD environments, movement, oil resistance, LSZH and conductor sizing.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Industrial Control Cable Selection for Machinery\" \/>\n<meta property=\"og:description\" content=\"Industrial control cable selection guide: compare YSLY, shielding, VFD environments, movement, oil resistance, LSZH and conductor sizing.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/\" \/>\n<meta property=\"og:site_name\" content=\"ETK Kablo English\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-20T07:25:08+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1774\" \/>\n\t<meta property=\"og:image:height\" content=\"887\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"ETK Kablo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"ETK Kablo\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"23 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/\",\"url\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/\",\"name\":\"Industrial Control Cable Selection for Machinery\",\"isPartOf\":{\"@id\":\"https:\/\/www.etkkablo.com\/en\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png\",\"datePublished\":\"2026-10-20T07:25:08+00:00\",\"author\":{\"@id\":\"https:\/\/www.etkkablo.com\/en\/#\/schema\/person\/1962fb9ee162af8a5f2777f5debeffea\"},\"description\":\"Industrial control cable selection guide: compare YSLY, shielding, VFD environments, movement, oil resistance, LSZH and conductor sizing.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#primaryimage\",\"url\":\"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png\",\"contentUrl\":\"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png\",\"width\":1774,\"height\":887,\"caption\":\"Industrial control cable selection infographic showing a screened multicore control cable for automation systems, control panels, machinery, OEM equipment and industrial facilities.\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.etkkablo.com\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Industrial Control Cable Selection for Automation and Machinery\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.etkkablo.com\/en\/#website\",\"url\":\"https:\/\/www.etkkablo.com\/en\/\",\"name\":\"ETK Kablo English\",\"description\":\"ETK Kablo is a leading manufacturer of fiber optic, telecom, and data cables. Discover high-performance cable solutions for global communication networks.\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.etkkablo.com\/en\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.etkkablo.com\/en\/#\/schema\/person\/1962fb9ee162af8a5f2777f5debeffea\",\"name\":\"ETK Kablo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.etkkablo.com\/en\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/f27f0308882571f5048a991b52ce943e0b28f29a75fd44de57d60792635cd1e4?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/f27f0308882571f5048a991b52ce943e0b28f29a75fd44de57d60792635cd1e4?s=96&d=mm&r=g\",\"caption\":\"ETK Kablo\"},\"sameAs\":[\"https:\/\/www.etkkablo.com\"],\"url\":\"https:\/\/www.etkkablo.com\/en\/blog\/author\/etkadmin\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Industrial Control Cable Selection for Machinery","description":"Industrial control cable selection guide: compare YSLY, shielding, VFD environments, movement, oil resistance, LSZH and conductor sizing.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/","og_locale":"en_US","og_type":"article","og_title":"Industrial Control Cable Selection for Machinery","og_description":"Industrial control cable selection guide: compare YSLY, shielding, VFD environments, movement, oil resistance, LSZH and conductor sizing.","og_url":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/","og_site_name":"ETK Kablo English","article_published_time":"2026-10-20T07:25:08+00:00","og_image":[{"width":1774,"height":887,"url":"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png","type":"image\/png"}],"author":"ETK Kablo","twitter_card":"summary_large_image","twitter_misc":{"Written by":"ETK Kablo","Est. reading time":"23 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/","url":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/","name":"Industrial Control Cable Selection for Machinery","isPartOf":{"@id":"https:\/\/www.etkkablo.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#primaryimage"},"image":{"@id":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#primaryimage"},"thumbnailUrl":"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png","datePublished":"2026-10-20T07:25:08+00:00","author":{"@id":"https:\/\/www.etkkablo.com\/en\/#\/schema\/person\/1962fb9ee162af8a5f2777f5debeffea"},"description":"Industrial control cable selection guide: compare YSLY, shielding, VFD environments, movement, oil resistance, LSZH and conductor sizing.","breadcrumb":{"@id":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#primaryimage","url":"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png","contentUrl":"https:\/\/www.etkkablo.com\/en\/wp-content\/uploads\/2026\/09\/Industrial-Control-Cable-Selection-for-Automation-and-Machinery.png","width":1774,"height":887,"caption":"Industrial control cable selection infographic showing a screened multicore control cable for automation systems, control panels, machinery, OEM equipment and industrial facilities."},{"@type":"BreadcrumbList","@id":"https:\/\/www.etkkablo.com\/en\/blog\/industrial-control-cable-selection\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.etkkablo.com\/en\/"},{"@type":"ListItem","position":2,"name":"Industrial Control Cable Selection for Automation and Machinery"}]},{"@type":"WebSite","@id":"https:\/\/www.etkkablo.com\/en\/#website","url":"https:\/\/www.etkkablo.com\/en\/","name":"ETK Kablo English","description":"ETK Kablo is a leading manufacturer of fiber optic, telecom, and data cables. Discover high-performance cable solutions for global communication networks.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.etkkablo.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.etkkablo.com\/en\/#\/schema\/person\/1962fb9ee162af8a5f2777f5debeffea","name":"ETK Kablo","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.etkkablo.com\/en\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/f27f0308882571f5048a991b52ce943e0b28f29a75fd44de57d60792635cd1e4?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/f27f0308882571f5048a991b52ce943e0b28f29a75fd44de57d60792635cd1e4?s=96&d=mm&r=g","caption":"ETK Kablo"},"sameAs":["https:\/\/www.etkkablo.com"],"url":"https:\/\/www.etkkablo.com\/en\/blog\/author\/etkadmin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/posts\/5896","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/comments?post=5896"}],"version-history":[{"count":1,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/posts\/5896\/revisions"}],"predecessor-version":[{"id":5898,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/posts\/5896\/revisions\/5898"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/media\/5897"}],"wp:attachment":[{"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/media?parent=5896"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/categories?post=5896"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.etkkablo.com\/en\/wp-json\/wp\/v2\/tags?post=5896"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}