President’s Message
| 1 – Conductor | : | Electrolytic solid copper conductor |
| 2 – Insulation | : | Solid polyethylene insulation |
| 3 – Stranding | : | Insulations are stranded into pairs |
| 4 – Seperator | : | Pairs are stranded together with star shaped separator |
| 5 – Outer Jacket | : | UV resistant halogen-free outer jacket |
| Conductor Resistance Ω/km (20 °C) | Insulation Resistance MΩ/km (20 °C) | Mutual Capacitance nF/km | Resistance Unbalance | Propagation Velocity | Characteristic Impedance Ω (1-250 MHz) | Operating Voltage V DC | Test Voltage V (DC. 1 minute) |
|---|---|---|---|---|---|---|---|
| Max. 94 | 5000 | Max. 56 | %2 | %67-69 | 100 ±%5 | 250 | 1200 |
| Manufacturing | Smoke Density Test | Flame Retardancy Test | Corrosive Gas Test | Halogen-free Test |
|---|---|---|---|---|
| ANSI/TIA-568-C.2, IEC-61156-5, IEC-11801 | IEC 61034-2, VDE 0482-1034-2, BS EN 61034-2 | IEC 60332-1-2, VDE 0482-332-1-2, BS EN 60332-1-2 | IEC 60754-2, VDE 0482-267-2-3, BS EN 50267-2-3 | IEC 60754-1, VDE 0482-267-2-1, BS EN 50267-2-1 |
Cat 6 U-UTP LSOH (Pair)
| Part Number | Pair Count | Conductor Diameter (mm) | Approx. Cable Diameter (mm) | Copper Weight (kg/km) | Approx. Weight (kg/km) | Packing Lengths (m) |
|---|---|---|---|---|---|---|
| 3.416.2.1.3.0057.0.0004 | 4 | 0,57 | 6,4 | 19,9 | 45 | 100/500/1000 |
| Bending Radius | Temperature Range Operating |
|---|---|
| 8.0xD mm | -20°C ~ +60°C |
| Frequency MHz | Insertion Loss dB/100m (Max.) | Near-end Crosstalk (NEXT) dB (Min.) | Power-sum Near-end Crosstalk (PSNEXT) dB (Min.) | Equal-level Far-end Crosstalk (ELFEXT) dB/100m (Min.) | Power-sum Equal Level Far- end Crosstalk (PSELFEXT) dB/100m (Min.) | Return Loss (RL) dB (Min.) |
|---|---|---|---|---|---|---|
| 1 | 2 | 74.3 | 72.3 | 67.8 | 64.8 | 20 |
| 4 | 3.8 | 65.3 | 63.3 | 55.8 | 52.8 | 23 |
| 8 | 5.3 | 60.8 | 58.8 | 49.7 | 46.7 | 24.5 |
| 10 | 6 | 59.3 | 57.3 | 47.8 | 44.8 | 25 |
| 16 | 7.6 | 56.2 | 54.2 | 43.7 | 40.7 | 25 |
| 20 | 8.5 | 54.8 | 52.8 | 41.8 | 38.8 | 24.3 |
| 25 | 9.5 | 53.3 | 51.3 | 39.8 | 36.8 | 23.6 |
| 31.25 | 10.7 | 51.9 | 49.9 | 37.9 | 34.9 | 21.5 |
| 62.5 | 15.4 | 47.4 | 45.4 | 31.9 | 28.9 | 20.1 |
| 100 | 19.8 | 44.3 | 42.3 | 27.8 | 24.8 | 18 |
| 200 | 29 | 39.8 | 37.8 | 21.8 | 18.8 | 17.3 |
| 250 | 32.8 | 38.3 | 36.3 | 19.8 | 16.8 | 16.8 |
Cat 6 U/UTP LSOH Cable for Gigabit Ethernet
Cat 6 U/UTP LSOH cable is an unshielded Ethernet cable for fixed structured cabling where the project requires a low-smoke, halogen-free outer sheath. ETK Kablo manufactures this cable with four twisted pairs of solid copper conductors and Category 6 transmission characteristics through 250 MHz.
This product belongs to our Cat 6 U/UTP cable range. Its LSOH jacket addresses smoke and halogen requirements for building network installations.
23 AWG Solid Copper Cat 6 UTP Cable
The cable uses eight solid copper conductors arranged as four pairs. Each conductor has polyethylene insulation, while a star-shaped separator keeps the pairs apart. This geometry helps control crosstalk within the cable.
U/UTP means there is no overall metallic screen and no individual pair screen. Buyers also refer to this design as Cat 6 UTP cable. Select it for routes where the electromagnetic environment is suitable for unshielded cabling.
| Cable Size | Pair Count | Conductor Count | Conductor Size |
|---|---|---|---|
| Cat 6 U/UTP LSOH 4x2x23 AWG | 4 | 8 | 23 AWG solid copper |
Include the required total quantity and packing lengths when requesting this configuration.
Applications and Channel Length
Typical applications include office LAN connections, IP telephones, network cameras and wireless access points. The cable supports 1000BASE-T Gigabit Ethernet as part of a correctly designed and installed cabling channel.
A conventional structured-cabling channel allows up to 100 metres, typically comprising a permanent link of up to 90 metres plus patch and equipment cords. Use compatible Category 6 connecting hardware and verify the completed installation with the appropriate field tests.
The 250 MHz specification describes the cable’s transmission frequency range. It is separate from the Ethernet data rate and should not be read as a 250 Mbps speed limit.
LSOH Sheath and Fire-Related Requirements
LSOH and LSZH both refer to low-smoke, halogen-free cable materials. The product documentation lists IEC 61034-2 for smoke density and IEC 60754-1 and IEC 60754-2 for halogen and corrosive-gas characteristics.
These material properties do not establish circuit integrity during fire. Where a project specifies a CPR Euroclass or additional fire tests, confirm the documentation for the selected cable before ordering.
Frequently Asked Questions
Can this Cat 6 cable support Power over Ethernet?
The product datasheet lists Power over Ethernet as an application. Confirm the required PoE type, channel length, bundle size and ambient temperature for the installation. The PoE reference alone does not establish suitability for every power level.
What is the difference between U/UTP and F/UTP?
U/UTP has no metallic screen, while F/UTP includes an overall foil screen. If your network design requires screening, explore our Cat 6 F/UTP cables and specify compatible screened connecting hardware.
Is this the outdoor Cat 6 UTP version?
This page covers the LSOH-jacketed product. For outdoor routes requiring a polyethylene sheath, see the separate Cat 6 U/UTP PE Ethernet cable. Although this LSOH product has a UV-resistant jacket, route suitability also depends on moisture exposure and mechanical protection requirements.
Request a Cat 6 U/UTP LSOH Cable Quotation
Contact ETK Kablo with your required quantity, packing lengths, installation conditions and project documentation requirements. For PoE installations, also include the intended power level and cable-bundling conditions.
